Table and Chair Sets
	1) Put all your chairs around your patio table in their normal positions. 2) Measure from the chair back at one end of the table to the chair back farthest away     across the table. This is the diameter of the cover. This diameter will be significantly     larger than your table measurement alone. 3) Measure the tallest chair's back height from the ground. A 'high back chair' is any chair     with a back taller than 35". 4) Choose the cover that is the same size or slightly larger than the width you measured,     with a 'skirt' length that is 2" to 6" shorter than your chair back measurement to allow     ground clearance.   Typical measurements: KoverRoos® sizes Fit Table and Chair Seat sizes 82" diameter Round and Square table and chair sets with tables up to 50" 108" diameter Round and Square table and chair sets with tables up to 78" 108" X 82" Oval or Rectangular table and chair sets with tables up to 78" X 48" 132" X 74" Oval or Rectangular table and chair sets with tables up to 102" X 40" Note: the 28" height is appropriate for most sets with 'low back' chairs (i.e. chairs less than 35" high) 88" diameter Round and Square table and high back chair sets with tables up to 54" 114" diameter Round and Square table and high back chair sets with tables up to 78" 112" X 88" Oval or Rectangular table and high back chair sets with tables up to 78" X 48" 140" X 80" Oval or Rectangular table and high back chair sets with tables up to 102" X 40" Note: The 36" height is appropriate for most sets with 'high back' chairs (i.e. chairs that are 25" high or taller).
	Chairs
	Measure the chair back's height from the ground. A 'high back chair' is any chair with a back taller than 35"; anything under 35" is a 'low back chair.'
	BBQ Grills
	Measure the grill back's height from the ground and the grill front's height from the ground. Then measure the length and width of the grill itself.
	Measuring Notes
	The proper size cover is necessary to get optimum performance from your new cover. Try to pick the smallest size that will meet or exceed the measurements you have taken. If your cover is too large, it will sag, allowing water to accumulate. KoverRoos® are designed to channel water off of your cover, but if the cover is too large there will not be enough tension for this design to work effectively. If your cover is too tight, the places some areas may stretch out and deteriorate prematurely. Properly fitted covers will last longer than those that are either too tight or much too loose, so KoverRoos® recommends taking the time to measure before ordering.